6 Noises from Your Heating System You Shouldn’t Ignore

Some people ignore the check engine light in their car or the recommended updates for their computer, but when it comes to their home’s heating system, there are noises they should never ignore.

Here’s a guide to common sounds your furnace might make and what you need to do about them.

1. Banging or Clanging Sounds

Loud banging or clanging noises could be due to loose or broken components. This sound might indicate that parts are hitting each other, which can lead to further damage if not addressed quickly.

2. Squealing or Screeching Noises

Squealing or screeching noises usually indicate a problem with the blower motor or a worn-out belt.

If the blower struggles to operate, it may overheat, leading to potential breakdowns. Contact an HVAC technician to inspect your blower motor and belt.

3. Hissing Sounds

Hissing noises can indicate a serious issue, often related to a gas leak or steam escaping from a pipe.

If you smell gas or hear a hissing sound, turn off the furnace and immediately leave the house. Call your gas company to shut off your gas supply, then call a qualified technician to assess the situation.

4. Clicking Noises

While some clicking is normal, like when your system turns on, repeated clicking or a constant clicking sound can indicate a malfunctioning ignition system or electrical issues. It’s best to consult a technician to diagnose the problem.

5. Popping or Cracking Sounds

Popping or cracking noises can occur when there is an issue with your heat exchanger.

While some popping or cracking noise is normal and can be caused by warm air hitting the cold metal of the ducts, loud or continued popping could signal a problem with the heat exchanger itself.

Loud popping noises should get immediate attention since it could signal a problem with your furnace.

6. Low, Continuous Humming Noises

A low, continuous hum might be normal and likely not cause for immediate concern.

A hum that gets louder could indicate a problem with the blower motor or other electrical components and needs to be looked at by a professional technician.

Book Heating Services with Len The Plumber Heating & Air

While some furnace noises are normal, others can indicate a serious issue that requires heating repair. Regular tune-ups can help uncover small problems with your HVAC system and reduce the risk of breakdowns.

If your system is making noises or you’re ready to schedule routine maintenance, contact Len The Plumber Heating and Air in the mid-Atlantic region.

This post first appeared on https://lentheplumber.com

Spooky sounds! Unsettling odors! The creeping fear that something might be wrong with your heating system! All this can be completely avoided, helping you to feel safe, cozy, and peaceful this autumn. What do you need to do to make sure you won’t have heating problems? Routine maintenance! Here’s all the information you need. Be sure to schedule heating maintenance in Livingston, NJ for peace of mind and a relaxing autumn.

Maintenance Begins with a Cleaning

When your technician comes to perform heating maintenance, the first point of order is to get the whole system clean. This isn’t an ordinary house-cleaning type of job, though, because some of the components need to be disassembled by an expert in order for all nooks and crannies to get scrubbed. 

Getting everything clean is, in itself, helpful to your heating system. It reduces wear on various parts because there won’t be grit working its way into moving parts. It prevents overheating of parts like the blower fan motor because it won’t be wearing a heavy blanket of dust to keep the heat in. But it also makes it possible for the technician to get a clear view of all the components of the system.

Inspection and Testing

Now, your technician gives everything a detailed inspection. Are any components worn and in need of replacement? Are any components loose or out of place and in need of adjustment? This is so helpful to the system’s functionality that 85% of repairs you might otherwise need can be entirely avoided with maintenance. The issues have been caught before they cause major problems!

Safety is top of mind in this process. Whether your furnace is gas or electric, all parts that could pose a risk are checked closely. Safety mechanisms like the limit switch are inspected. All heating systems have electrical components, too, so those go through a testing process to make sure connections are secure and power is flowing as it should be.

Lubrication

Friction is a major enemy of a heating system. It causes wear and tear. It increases heat on internal components. It can lead to the limit switch being triggered, so the system shuts down for safety reasons. It can even cause the wiring to literally melt and fuse together. So it’s critical to minimize friction which is done by applying fresh lubricant to those components that move against one another.

The Benefits of Maintenance

In addition to reducing the need for repairs and keeping you and your family safe, maintenance has many benefits. It increases the efficiency of the system, and also the longevity—a heating system that gets maintenance every year will last much longer than one that never receives maintenance. And it can keep your system under warranty.

Don’t let fall furnace failures freak you out! It’s easy to make sure your heating system will work smoothly and safely when the cold weather hits by scheduling maintenance with our team.

Contact MarGo Plumbing Heating Cooling Inc. today to schedule an appointment or ask any questions about your HVAC system.

The post Avoid Creepy Heating Problems with Fall Maintenance first appeared on MarGo Plumbing Heating Cooling Inc..

This post first appeared on https://margoplumbing.com

Pipe lining and repair can be expensive. In Sacramento, given the ongoing drought and recent attempts to lower water consumption, home and city sewer pipes are taking things particularly rough. As we’ve outlined in previous blog features, previous droughts have pushed many in California to lower their overall consumption by any means necessary; limited lawn water use, water recycling, and other such practices.

Read More

Choosing the right plumbing services is essential for maintaining the health and efficiency of your home or commercial building. Good plumbing ensures that water flows smoothly, waste is disposed of properly, and potential issues are identified and resolved quickly. Whether it’s a leaky faucet, a clogged drain, or a major installation, finding a reliable plumber can save you time, money, and stress.

In our guide, we aim to simplify the process of picking the best plumbing services in 2024. Knowing what to look for and what questions to ask can make a significant difference in your overall experience. We focus on helping you understand your specific plumbing needs, the types of services available, and how to evaluate potential service providers effectively.

Making informed decisions about plumbing services keeps your systems running smoothly and prevents unexpected problems. By following our easy-to-understand tips, you can ensure that your plumbing is in good hands and that you’re getting the best value for your investment.

Understanding Your Plumbing Needs

The first step in choosing the best plumbing services is understanding your plumbing needs. This involves assessing both your current situation and any potential future requirements. For residential properties, consider common issues like leaky faucets, running toilets, and slow drains. You might also think about bigger projects like installing new fixtures or repiping older homes. Knowing what issues you face helps us recommend the right solutions and services.

For commercial properties, the scope can be broader. Businesses often have more complex plumbing systems that might need regular maintenance or specialized services like grease trap cleaning and backflow prevention. Understanding the specific demands of your business environment is crucial. Whether you manage a restaurant, office building, or retail store, identifying your unique plumbing needs allows us to provide tailored services that keep your operations running smoothly.

Important Questions to Ask a Plumbing Service

When you’ve identified your plumbing needs, the next step is to find a reliable service provider. Asking the right questions is key to ensuring you choose the best one for the job. First, inquire about their licensing and insurance. It’s important to know that the plumbers are certified and that you’re protected in case of an accident. Ask about their experience with the specific services you need, whether it’s residential repairs, commercial installations, or specialized tasks like drain cleaning.

Another important question is about their availability and response time. Plumbing issues can be urgent, so knowing that the service can respond quickly is vital. You might also want to ask for references or testimonials from previous clients to get a sense of their reliability and quality of work. Finally, discuss pricing and any guarantees they offer. Clear and upfront pricing helps avoid surprises later, and guarantees provide peace of mind that they stand by their work.

Comparing Different Plumbing Services

Once you understand your needs and ask the right questions, the next step is comparing different plumbing services. Start by looking at the range of services offered. A good plumbing service should handle everything from simple repairs to major installations. Check if they provide both residential and commercial services if needed. Choosing a provider that can address various plumbing issues is beneficial so you won’t have to find different specialists for different problems.

Compare their pricing structures as well. While cost shouldn’t be the only factor, it’s important to find a service that offers transparent and competitive pricing. Some companies might provide free estimates to help you compare costs without any upfront commitment. Additionally, look for any special offers or maintenance plans that can save you money in the long run. Lastly, consider their customer service and availability. A company that is responsive and offers emergency services can be crucial when you encounter unexpected plumbing issues.

How to Evaluate Customer Reviews and References

Customer reviews and references are valuable tools for gauging the reliability and quality of a plumbing service. Start by checking online reviews on trusted websites. Look for consistent patterns in the feedback. Positive reviews that highlight specific experiences, like timely service and effective solutions, can be a good indicator of the plumber’s reliability. Pay attention to how the company responds to negative reviews as well, as this can show how they handle customer complaints and resolve issues.

Beyond online reviews, ask the plumbing service directly for references. Speaking to past customers can give you detailed insights into their experiences. Ask about the quality of work, professionalism, and whether the work was completed on time and within budget. Recommendations from friends or family members can also be very valuable. By thoroughly evaluating reviews and references, you can make a more informed decision and feel confident about the service you choose.

Conclusion

Choosing the best plumbing services in 2024 involves understanding your needs, asking important questions, comparing different services, and evaluating customer feedback. These steps ensure that you get reliable, quality service for all your plumbing requirements. From small repairs like fixing a leaky faucet to larger projects such as installing new plumbing systems, the right service provider makes all the difference in maintaining efficient and functional plumbing.

At The Irish Plumber, we are committed to offering top-notch plumbing services tailored to your needs. Whether you need residential or commercial plumbing services, installations, replacements, toilet repairs, or drain cleaning, we have the expertise and tools to deliver excellent results. Contact The Irish Plumber today and let us help you with all your plumbing needs.

As incident-free as pipe lining applications typically go, there is always a slim possibility of error; this is just a universal truth in home and commercial renovation, including plumbing care. Trenchless pipe lining, the application and curing of epoxy resin materials within broken pipe walls, is no exception. 

Read More

In the heart of California, where the historic charm of Sacramento meets modern living, homeowners and businesses face a common challenge: maintaining and repairing aging plumbing systems without disrupting the city’s picturesque landscapes. Enter trenchless plumbing, an innovative solution that’s transforming how plumbing repairs are approached in Sacramento.

Read More

Moving into a new home is an exciting milestone, but it also comes with a list of responsibilities. One of the most important areas to understand is your home’s plumbing system. Good plumbing is essential for your home’s functionality and your family’s comfort. Learning some basic plumbing tips can help you avoid costly issues and ensure your plumbing stays in good shape.

Knowing your main water shutoff valve is crucial. In case of a leak or burst pipe, shutting off the water quickly can prevent significant damage. Familiarizing yourself with regular plumbing maintenance tasks can also keep your system running smoothly. Simple checks and minor fixes can often save you from larger problems down the road.

Handling common toilet issues and preventing clogged drains are other essential skills for new homeowners. Toilets and drains are used multiple times a day, so keeping them in good working order is vital. By learning how to handle these common problems, you’ll be better prepared to maintain your home efficiently.

In this article, we will cover some essential plumbing tips every new homeowner should know. From finding your main shutoff valve to preventing clogs, these tips will help you manage your home’s plumbing with confidence.

Know Your Main Water Shutoff Valve

One of the first things to learn as a new homeowner is the location of your main water shutoff valve. This valve controls the flow of water into your home. In case of a leak or a burst pipe, knowing how to shut off the water quickly can save you from major water damage.

Look for the valve where the main water line enters your home. This is often located in the basement, crawl space, or near the water meter. The valve might be a wheel that you turn clockwise to shut off the water or a lever that you turn perpendicular to the pipe.

It’s a good idea to practice turning off the valve so you’re confident you can do it in an emergency. Make sure other family members know where it is and how to use it as well. Regularly check the valve to ensure it moves smoothly and isn’t corroded or stuck.

Regular Plumbing Maintenance: What to Check

Keeping up with regular plumbing maintenance can prevent many common problems. A little effort can save you from expensive repairs and ensure your plumbing system works efficiently.

Check for leaks. Inspect under sinks, around toilets, and in your basement or crawl space. Even small leaks can lead to bigger issues if left unchecked. Fixing leaks promptly can prevent water damage and mould growth.

Next, test your water pressure. High water pressure can damage pipes and fixtures, leading to leaks and other issues. Use a water pressure gauge to check the pressure; it should be between 40-60 psi. If it’s too high, installing a pressure regulator can help.

Also, inspect your water heater. Check for any signs of rust or leaks around the tank. Drain a few litres of water from the tank every few months to remove sediment buildup. This helps keep the heater running efficiently and extends its life.

By performing these simple maintenance tasks, you can keep your plumbing system in good shape and avoid many common issues.

Handling Common Toilet Issues

Toilets are one of the most used fixtures in any home, so it’s important to know how to handle common issues. Some problems you might encounter include running toilets, clogs, and weak flushes.

A running toilet can waste a lot of water and raise your water bill. The most common cause is a faulty flapper. The flapper is the rubber piece that seals the tank water. If it’s worn or dirty, replace or clean it. Also, check the fill valve and adjust the float if necessary. Keeping these parts in good condition can stop your toilet from running constantly.

Clogs are another common issue. A plunger is usually the first tool to try. Place the plunger over the hole in the toilet and push down gently to create a seal, then pump it vigorously a few times to dislodge the clog. If that doesn’t work, use a toilet auger to reach deeper clogs.

Lastly, weak flushes can be caused by several factors. Check the water level in the tank; if it’s too low, the flush won’t be strong. Adjust the float valve to raise the water level. Also, clean the holes under the rim of the toilet bowl to ensure good water flow.

Preventing and Dealing with Clogged Drains

Clogged drains can be a major hassle, but preventing them is easier than you might think. Here are some tips to keep your drains flowing freely.

Watch what goes down your drains. Avoid pouring grease, coffee grounds, or large food particles down the kitchen sink. Use a strainer to catch hair and soap scum in bathroom drains. These simple steps can prevent clogs before they start.

Regular cleaning can also help. Pour a mixture of hot water, baking soda, and vinegar down your drains once a month to clear away the buildup. This natural solution can keep your pipes clean without harsh chemicals.

If you do get a clog, try using a plunger first. For tougher clogs, a drain snake or auger can help clear the blockage. Insert the snake into the drain and twist it to break up the clog or pull it out. Be patient, as this process might take a few tries.

For persistent clogs, you may need to call a professional to clear your drains thoroughly. Regular maintenance and good habits can go a long way in keeping your drains clear.

Conclusion

Understanding basic plumbing tips can significantly help new homeowners manage their homes more efficiently. By knowing your main water shutoff valve, performing regular plumbing maintenance, handling common toilet issues, and preventing clogged drains, you can prevent many common problems and avoid costly repairs.

Regular maintenance ensures that your plumbing system stays in good condition, saving you time and money. However, some problems might need a professional touch. If you encounter plumbing issues that you can’t handle on your own, don’t hesitate to call The Irish Plumber. We’re here to help you keep your home’s plumbing in perfect working condition.

For reliable and expert plumbing services in Ottawa and nearby areas, reach out to The Irish Plumber today. Let us handle your plumbing concerns so you can enjoy your new home without worries.

Every home relies on a good plumbing system to function smoothly. Over time, however, wear and tear can take a toll on your pipes, fixtures, and appliances. Ignoring these issues might lead to bigger problems and costly repairs. Knowing when to upgrade your plumbing can save you time, money, and frustration.

Sometimes, frequent plumbing repairs are a sign that it’s time for an upgrade. If you are constantly fixing leaks, unclogging drains, or dealing with low water pressure, it might be a signal that your plumbing system is outdated or failing. Upgrading your plumbing can provide a more reliable and efficient system, giving you peace of mind.

In this article, we’ll go through some of the key signs that indicate your home may need a plumbing upgrade. Understanding these signs can help you decide when it’s time to take action. So, let’s dive in and explore how you can keep your plumbing in top condition.

Frequent Plumbing Repairs: When to Consider an Upgrade

Is your home’s plumbing causing you constant headaches with frequent repairs? Repeatedly fixing leaks, clogs, or toilet issues can be a sign that your plumbing system needs an upgrade. Frequent repairs can add up quickly in costs and time, making it more practical to consider a full system replacement.

Aging pipes are one of the main culprits for frequent repairs. Old pipes can corrode, rust, and become brittle, leading to leaks and bursts. If you find yourself calling a plumber more often than usual, it may be time to replace those old pipes with new, durable materials like PEX or copper.

Another sign to consider an upgrade is if you’re constantly dealing with drain issues or low water pressure. Poor performance can indicate that your plumbing system has reached the end of its lifespan. Upgrading your plumbing not only solves these issues but can also improve water efficiency, saving you money on your water bill in the long run.

Low Water Pressure: Causes and Solutions

Experiencing low water pressure can be frustrating. It makes simple tasks like showering or washing dishes take much longer. Low water pressure has several possible causes, and identifying the root of the problem can help you decide the best course of action.

1. Clogged Pipes:

– Over time, mineral deposits can build up inside your pipes, restricting water flow and leading to low pressure. Professional cleaning or pipe replacement may be necessary to fix this issue.

2. Leaking Pipes:

– Hidden leaks can reduce water pressure. If you notice damp spots on your walls or ceilings, it’s crucial to have a plumber inspect your system for leaks and make necessary repairs.

3. Faulty Fixtures:

– Sometimes, the problem lies in the fixtures themselves. Older or malfunctioning faucets and showerheads can affect water pressure. Replacing these fixtures can often resolve the issue.

4. Municipal Supply Issues:

– Occasionally, the problem may not be within your home. Municipal water supply issues can lead to low pressure. Contact your local water provider to see if there are any known problems.

By identifying the cause of low water pressure, you can determine the appropriate solution, whether it’s cleaning your pipes, fixing leaks, or upgrading fixtures. Taking care of these issues can restore proper water flow and improve your overall plumbing experience.

Persistent Drain Issues: Signs of Bigger Problems

Dealing with persistent drain issues can be more than just a minor inconvenience. If your sinks, showers, or toilets are frequently clogged or draining slowly, it might be a sign of a bigger problem lurking in your plumbing system. Ignoring these signs can lead to severe damage and costly repairs.

One common cause of persistent drain problems is a blockage in the main sewer line. Tree roots, debris, and buildup can cause serious clogs that affect the entire home’s drainage. You might notice multiple drains getting backed up at the same time. This situation requires professional drain cleaning to clear the blockages and ensure proper water flow.

Another issue could be pipe damage. Old or damaged pipes can lead to recurring clogs and slow drainage. Cracks, corrosion, or misalignment in pipes can obstruct water flow and cause frequent problems. If you’re experiencing consistent drain issues, it might be time to have your pipes inspected and possibly replaced.

Ignoring persistent drain problems can lead to bigger headaches down the road. Early detection and addressing the root cause can save you time and money, and keep your plumbing system running smoothly.

Outdated Fixtures and Appliances: Time for a Replacement

Old fixtures and appliances not only look outdated but can also impact the efficiency and reliability of your plumbing system. If your faucets, toilets, and other fixtures are showing signs of wear and tear, it might be time to consider an upgrade.

Older toilets, for instance, can use a lot of water per flush compared to modern, water-efficient models. Upgrading to a new toilet can save significant amounts of water and reduce your utility bills. Similarly, leaky faucets or showerheads can waste water and lead to higher bills. Replacing them with newer models can improve water efficiency and your bathroom’s overall look.

These fixtures may also develop rust, corrosion, or mineral buildup over time, affecting their appearance and performance. Old appliances like water heaters or dishwashers may not work as efficiently as they once did, leading to higher energy and water use. Upgrading your appliances can improve performance and reduce costs in the long term.

By replacing outdated fixtures and appliances, you can enhance your home’s plumbing efficiency and aesthetics, making your daily routines more comfortable and cost-effective.

Conclusion

Determining when your home needs a plumbing upgrade is crucial for maintaining a reliable and efficient system. Frequent repairs, low water pressure, persistent drain issues, and outdated fixtures are all signs that it might be time to take action. Addressing these problems promptly ensures your plumbing works smoothly, reduces water waste, and prevents costly repairs in the future.

Unsure if your home needs a plumbing upgrade? Contact The Irish Plumber. Our expert team can help you assess your plumbing system and recommend the best solutions. Call The Irish Plumber today to schedule an inspection or plumbing services in Ottawa. Let us help you keep your home’s plumbing in top shape.

Keeping drains clean and clear is crucial for the smooth operation of your home’s plumbing system. Clogged gutters can cause water to back up, resulting in unpleasant odours and potential water damage. While it may seem a minor issue initially, a clogged drain can lead to more significant problems if not addressed promptly. Knowing how to clean and maintain your drains effectively can save you time, money, and stress.

This article will explore practical tips for keeping your home’s drains flowing freely. From identifying the common causes of clogs to learning simple DIY cleaning methods, we’ve got you covered. We’ll also share preventive measures to help you avoid future blockages and discuss when it might be time to call in a professional plumber.

Understanding these essential drain cleaning tips will improve the efficiency of your plumbing and enhance the overall comfort and functionality of your home. Whether you’re dealing with a slow-draining sink or a stubborn blockage, our guide will help you keep your drains in top shape year-round.

Identifying Common Causes of Clogged Drains

Clogged drains happen for various reasons and can affect different parts of your home, such as sinks, showers, and toilets. One common cause is the buildup of hair in bathroom drains. Hair can get tangled and combine with soap residue, creating a stubborn blockage. Regularly cleaning out hair from your gutters can help prevent this issue.

Another common cause is grease and food particles in kitchen sinks. When you pour grease down the drain, it can solidify and stick to the pipes. Over time, this creates a thick blockage that restricts water flow. Scraping food off plates before washing and disposing of grease properly can help keep your kitchen drains clear. Additionally, small objects like jewellery or toys can accidentally fall into drains, causing clogs in unexpected places.

DIY Drain Cleaning Methods

Cleaning your drains yourself can be simple and effective with the correct methods. One popular DIY method is using a plunger. Plungers create suction that can dislodge blockages in sinks and toilets. Make sure to cover any overflow openings to ensure maximum suction.

Another method is a mixture of baking soda and vinegar. Pour half a cup of baking soda down the drain, followed by half a cup of vinegar. Let it sit for about 15 minutes, then flush with hot water. This combination creates a chemical reaction that can break down minor clogs and freshen the drain.

For more problematic clogs, you might need a drain snake. Insert the snake into the drain and twist it to break the blockage. Slowly retract the snake to remove debris. These methods are usually safe and effective for minor clogs, but persistent or severe blockages may require professional attention.

Preventive Measures to Keep Drains Clear

Taking preventive measures can prevent clogged drains from occurring. Drain guards or filters are one of the best ways to clear drains. These simple tools catch hair, food particles, and other debris before they go down the drain, making them easy to dispose of.

Another effective preventive measure is being mindful of what goes down your drains. Avoid pouring grease, oils, and coffee grounds into your kitchen sink. Instead, dispose of these items in the garbage or compost. In the bathroom, try not to flush anything other than toilet paper and human waste. Paper towels, sanitary products, and hair can also cause severe blockages.

Regular maintenance is also crucial. Pour boiling water down your drains once a week to dissolve any buildup inside the pipes. Mixing baking soda and vinegar monthly can also help maintain clear, odour-free drains.

When to Call a Professional Plumber

While DIY methods and preventive measures are helpful, there are times when you need to call in the experts. If you’ve tried multiple approaches and the drain is still clogged, it’s time to contact a professional plumber. Persistent blockages can indicate a more significant issue deeper in your plumbing system.

Unusual odours or gurgling from your drains are other signs to call a plumber. These could signal a blockage in the venting system or a problem with your sewer line. Ignoring these signs can lead to costly repairs down the road.

Additionally, if multiple drains in your home are backing up simultaneously, it strongly indicates a severe blockage or a sewer line issue. This situation requires immediate professional intervention to prevent damage and restore proper drainage.

Conclusion

Maintaining clear and efficient drains is essential for a smoothly running home. By identifying common causes of clogs, you can take steps to prevent them and address minor issues before they escalate. DIY drain cleaning methods are effective for minor blockages, but knowing when to call a professional plumber can save you from more significant problems.

Preventive measures like using drain guards and being mindful of what goes down the drain are simple yet effective ways to keep your plumbing in top condition. Regular maintenance ensures your drains stay clear and reduces the risk of clogs.

For expert help with stubborn drain issues or regular maintenance, contact The Irish Plumber. Our team of professionals is ready to assist with all your plumbing needs, ensuring your home remains comfortable and functional year-round. Reach out to us for reliable drain cleaning services and peace of mind.

Autumn approaches! The weather is gorgeous, the fall festivities are starting, and you will soon be done using your air conditioner for the season. But before you start up your heat and get the hats and mittens out of the attic, take the time to pay a little bit of attention to your AC system. Here are our top tips for end-of-season AC care, so you can make sure your air conditioner will weather the winter well.

1: Assess the Condition of the Air Conditioner

It’s always best to have any service done as soon as possible, so before you forget about your AC for several months, give it an honest assessment. Has it been making any funny noises or smells? Have you been concerned about its effectiveness, or noticed any unexpected increase in your electric bills? Give it a thorough look-over. Do you see anything that seems wrong?

If you do have any concerns, schedule an appointment to have your air conditioner serviced before it sits in disuse for the winter. Having any repairs done now can avoid worsening problems and more costly repairs come spring.

2: Shut It Down Completely

If you only switch your thermostat from “cool” to “heat,” you aren’t actually shutting the air conditioner down. For the sake of the AC system, as well as to avoid the risk of electrical shock, the system should be shut down completely. There is a main on/off switch near the outdoor unit. Lift up the lid that covers it and flip the switch into the “off” position.

3: Clean the Outdoor Unit

Because the condenser unit is outside, it is vulnerable to all sorts of natural forces, and thus it gets quite dirty. It does contain delicate fins and the condenser coils, so you don’t want to do anything that might damage them. To get the outdoor unit clean as gently as possible, use a hose at low pressure to wash it down.

4: Weatherize the Outdoor Unit

Keeping the newly cleaned outdoor unit covered will protect it from winter storms, ice shards, blowing branches, and more. Make sure it’s completely dry after the cleaning before you put a winterizing cover on your outdoor AC unit in Clifton, NJ. 

Most home supply stores will have AC condenser covers on hand at this time of year which are perfectly suited to the task, but it is possible to wrap the unit in heavy plastic sheeting or tarp. Just make sure it’s tightly secured.

5: Now It’s Time for the Hats and Mittens

Your air conditioner is ready to rest for the winter! Put on your favorite sweater, make yourself some hot cocoa or spiced apple cider, and get ready to hunker down. Don’t forget to make an appointment for heating maintenance, so when the fall breezes turn into cold winter wind, you’ll be able to keep cozy!

Contact MarGo Plumbing Heating Cooling Inc. today with AC or heating concerns or any questions about your HVAC system!

The post End-of-Season AC Care first appeared on MarGo Plumbing Heating Cooling Inc..

This post first appeared on https://margoplumbing.com