Category: Uncategorized

There are some plumbing issues that are perfectly reasonable to tackle yourself as a homeowner. And then there are others that require the expertise of a plumbing professional. Trying to determine which is which can be a little tricky. We’d like to give you some pointers that can help you decide when to take a DIY approach and when to call a plumber. 

Plumbing Jobs to Tackle Yourself

• Drain Clogs: If you have a blocked or slow drain in one place in your home, try a couple of things yourself. A sink plunger, thrust vertically with some standing water around it, may dislodge a clog. A drain snake might be able to pull out or dislodge your clog. Don’t use chemical drain cleaners! They’re not safe for you or your plumbing.

• Low-Risk Jobs: Assess what might go wrong and how bad it could be. If you know how to shut off the water to your bathroom sink, for example, changing the faucet should not pose any major hazards to you or your home. Don’t forget the risk of having to pay for something twice if your DIY fails.

• Non-Specialized Jobs: If something only requires simple tools and limited knowledge of plumbing, it might be reasonable to give it a try yourself. 

Plumbing Jobs to Leave to the Professionals

• Widespread Drain Issues: If you have bigger problems with your drain or sewer pipes, call a plumber. The signs of this include multiple clogged drains, recurring drain clogs, unpleasant smells, mold invading your basement, or places on your lawn that are suspiciously soggy or where the grass is surprisingly lush and green.

• Widespread Foul Odors: If more than one drain is emitting nasty smells, or you can’t eliminate odors with baking soda and vinegar, it may be that sewer gasses are escaping into your home. A blocked sewer vent could be the culprit, and it’s critical to get help immediately because those gasses are toxic.

• High-Risk Jobs: If a poor result from a DIY attempt could result in significant cost, water damage or a broken major appliance, let the professionals handle it. Keep in mind that amateur work on appliances could result in voided warranties.

• Specialized Jobs: If you are uncertain how to approach a problem, or don’t have the necessary tools, that’s exactly what plumbers are there for.

• Installations: Amateur installation of appliances such as water heaters are one of the main causes of increased repair needs throughout the life of the appliance, and will almost definitely void your warranty. Always get off to a good start with a professional installation.

• Urgent Needs: If it would pose a big problem to have your issue unresolved for days while you tried to figure it out, call for plumbing repair in Orlando. 

• Gas Line Work: Never work on a gas line yourself. Our team is highly trained and qualified to do such work safely. Amateur gas line work is so dangerous that in most places, it is actually illegal. Protect yourself, your home, and your family by relying on professionals.

Contact Modern Plumbing Industries, Inc. today and reach professionals with the training and experience your home deserves.

The post Where DIY Work Just Doesn’t Cut It first appeared on Modern Plumbing Industries Inc. Blog.

This post first appeared on https://www.modernpi.com

Earth Day is the perfect time to reflect on how to be more conscious of how our actions affect the planet. As homeowners, doing so has two benefits.

Not only are you doing something that’s good for the Earth, but you’re also helping out your home and your wallet by adopting more environmentally friendly habits.

One of the most important ways to save money while reducing wastage is through water conservation. According to the EPA, the average American home uses more than 300 gallons of water per day at home. Here are 6 ways you can make small changes to save a lot of water in your home.

1. Don’t Use Drain-Cleaning Chemicals

Not only do these not work, but they’re also bad for the environment–and your pipes. If you have a slow drain or one that’s completely clogged, call a professional for drain cleaning in Clifton, NJ rather than pouring caustic chemicals down the sink. 

2. Only Put Toilet Paper Down the Toilet

It may be tempting to drop a wet wipe, Q-tip, feminine hygiene product, or cat litter down the toilet, but doing so will eventually cause many problems not just to your home’s plumbing but to sewer systems and water treatment facilities. You should only ever flush toilet paper and human waste.

3. Insulation Blanket For Your Water Heater

Blankets keep you warm at night while you’re sleeping and the same principle applies to your water heater. An insulation blanket for your water heater helps it keep a consistent internal temperature so it doesn’t have to work as hard to heat your home’s water supply. 

4. Turn the Faucet Off When Not in Use

It’s easy to leave the water running when you’re engaged in tasks such as brushing your teeth, shaving, rinsing dishes, and even washing your hands. But turning off the faucet when you’re not directly using the water is a great way to save water. In fact, it’s been estimated that you can save 8 gallons of water each day by simply switching off the faucet in between those tasks. 

5. Switch to Energy-Efficient Appliances

Do you have an ancient dishwasher or washing machine that’s still plugging away but you’re not pleased with how much noise it makes or how it doesn’t really do its job well? Earth Day is the perfect excuse to upgrade an outdated water hog. Modern dishwashers and clothes washers are designed to be super eco-friendly and will use a lot less water than outdated machines.

6. Know the Signs of Leaks

Here’s a startling statistic: the average American homeowner loses 10,000 gallons of water every year due to hidden leaks. Not only is this wasteful, hidden leaks can result in a lot of damage to your home when they continue undetected. 

The best way to “spot” a hidden leak is to check your water bill. Steady increases or sudden spikes could indicate a water leak somewhere in your system. If you’re concerned about a potential leak, a professional plumber can check for leaks through leak detection services. 

Contact the team at MarGo Plumbing Heating Cooling Inc. for professional help with your plumbing.

The post Eco-Friendly Plumbing Tips for Earth Day first appeared on MarGo Plumbing Heating Cooling Inc..

This post first appeared on https://margoplumbing.com

When it comes to plumbing issues, there’s no time to waste. You need a reliable and experienced plumber to take care of the problem quickly and efficiently. That’s why having access to 24-hour plumbing services is so important – because you never know when you might find yourself in an emergency situation that requires immediate attention.

From burst pipes and flooding basements to clogged drains or malfunctioning water heaters, a 24-hour plumber can provide peace of mind by responding promptly with the right tools and expertise needed for any job. Not only do they offer fast service, but they also have extensive experience dealing with various types of plumbing problems, so you can trust them to get the job done right the first time. In addition, many 24-hour plumbers are available on weekends or holidays as well as during regular business hours – giving customers greater flexibility when scheduling appointments or repairs around their own busy schedules.

Round-the-Clock Peace of Mind: The Value of a 24-Hour Plumber

1. 24-hour plumbers provide peace of mind in emergency situations by responding promptly and efficiently to any plumbing issue.

Having an emergency plumber is helpful because they can fix plumbing problems quickly. They are experienced and have the right tools to do the job. Plus, they can be available on weekends or holidays too so you don’t have to wait for regular business hours. This gives you peace of mind in case of an emergency situation with your plumbing.

2. 24-hour plumbers offer value to customers by providing reliable and experienced service.

When you have a plumbing issue, it’s important that you can trust the person doing the job so that everything gets fixed correctly the first time. They will not only do an excellent job but they also have extensive experience in dealing with different plumbing problems, so you can trust them to get the job done right.

3. They also provide flexibility when it comes to scheduling appointments or repairs around your own busy schedule.

Whether it’s an unexpected emergency or a planned project, having them available means that you don’t have to worry about trying to fit into their schedule. You can simply call them when it is convenient for you and they will be ready to help out whenever needed.

4. They are fast and efficient which saves you time and money.

With a reliable 24-hour plumber on call, there’s no need to waste time searching for someone who can do the job quickly or trying to fit into their schedule. You don’t have to worry about waiting for regular business hours either, as a 24-hour plumber is available anytime. Plus, they will get the job done right the first time so you won’t need to keep calling them back over and over again due to recurring issues or wrong fixes.

5. Emergency plumbers also offer peace of mind when it comes to pricing since they charge competitive rates that won’t break the bank.

They also provide cost-effective solutions by offering discounts and special offers on their services. This means that you can get the job done without having to worry about spending too much money.

6. They have extensive experience in dealing with many different plumbing issues, so you can trust them to do a great job no matter what kind of problem you have.

A professional in that field has seen it all before and knows exactly how to fix the issue quickly and correctly the first time so that your home or business is not left with any recurring problems.

7. Finally, a 24-hour plumber provides round-the-clock service which makes life easier for busy families and businesses who don’t always have time to wait for regular business hours.

With an emergency plumber, you can call anytime and have the assurance that help is just a phone call away.

At the end of the day, having access to a 24-hour plumber provides peace of mind and flexibility when it comes to dealing with plumbing problems. From emergency repairs to scheduled projects, they have the experience and expertise needed to get the job done quickly and correctly so you don’t have to worry about recurring issues or wrong fixes. You can trust them to provide reliable service at competitive prices while also giving you greater convenience when scheduling appointments around your own busy schedule. 

So if you’re looking for an experienced and dependable solution for your plumbing needs, look no further than 24-hour plumbers. They are available anytime to give you the help you need without fail. Need help finding what you’re looking for? Don’t hesitate to contact our team now!

Spring is a beautiful season, but it can also be a difficult time for those who suffer from allergies. As the weather warms up, plants begin to bloom and pollen counts rise. This can surely cause a lot of allergic reactions for people. One way to alleviate the symptoms of spring allergies is to ensure that your HVAC unit is working properly. Here are the top 5 ways your HVAC unit can help alleviate your spring allergies.

1. Regularly Change Your Air Filters

The air filters in your heating and cooling system are responsible for trapping allergens like pollen, pet dander, dust, dirt, and more. However, if your filters get clogged, they won’t be able to do their job effectively. That’s why it’s important you regularly change your air filters. Ideally, you should be changing them once a month (or every three months at least). This will ensure they’re clean and working properly. By doing this, you can greatly reduce the amount of allergens in your indoor air.

2. Keep Your HVAC Unit Clean

In addition to changing your air filters, it’s important to keep your HVAC unit clean. Dust and debris can accumulate inside the unit over time, which can exacerbate allergies. There are a few ways you can make sure you’re keeping your system clean. For one, you can dust the vents and registers in your home regularly. You can also wipe down the exterior of the unit. And last but not least, you can schedule a professional HVAC maintenance at least once a year.

3. Use A High-Efficiency Air Filter

Not all air filters are created equal. Some are designed to trap larger particles, while others are designed to capture smaller particles. A high-efficiency air filter, also known as a HEPA filter, is designed to capture about 99.97% of particles as small as 0.3 microns. By using a HEPA filter in your HVAC unit, you can greatly reduce the amount of allergens in the air you breathe.

4. Air Cleaners Systems and Other Indoor Air Quality Solutions

In addition to air filters, you can also invest in air cleaners systems or other indoor air quality solutions that can help reduce allergens even more. These systems use advanced technology designed to capture even the smallest airborne particles, including viruses and bacteria. By installing an air cleaner system, you will be able to breathe cleaner, fresher air and reduce the amount of allergens in your home this spring. At Cool Touch, we offer a variety of indoor air quality systems including: air cleaners, humidifiers, UV germicidal lights, and ductwork.

5. Proper Humidity Control

Humidity levels can significantly impact allergies. Too much moisture in the air can create a breeding ground for mold and other allergens, while low humidity can dry out your nasal passages and make them more susceptible to allergens. Your HVAC unit can help regulate humidity levels in your home, ensuring that they remain at a comfortable and healthy level for you and your family. You can also invest in a humidifier or dehumidifier.

Want To Alleviate Those Spring Allergies? Contact Cool Touch Today For All Your Indoor Air Quality Needs In The Prescott Valley and Phoenix, AZ Metro Areas

By following these five tips, your HVAC system can play a huge role in reducing allergens and alleviating your spring allergies. From regular air filter replacement to investing in an air cleaning system, there are several steps you can take to ensure your home is a healthy and comfortable place to be – always. Contact your local HVAC and indoor air quality specialists at Cool Touch today. Learn more about how you can help breathe easier this spring. We can be reached at [email protected]. For Phoenix services, you can call us at (623) 748-4942 and for Prescott Valley services, you can call us at (928) 339-3107.

The post 5 Ways Your HVAC Unit Can Help Alleviate Spring Allergies appeared first on Cool Touch Air Conditioning & Heating.

This post first appeared on https://www.thetrustedplumber.com

How Much Does It Cost To Get A New HVAC System In Arizona?

If you live in Arizona, you know how important a working HVAC system is. With the extreme temperatures and desert climate, an efficient and reliable HVAC system is a must. But how much does it cost to get a new HVAC system installed in Arizona? In this blog post, we’ll discuss the average cost of HVAC installation in Arizona and the factors that affect pricing. By the end of this post, you’ll have a better idea of how much to budget for your new HVAC system.

The Average Cost of a New HVAC System

When it comes to getting a new HVAC system for your home, the average cost for installation can vary greatly depending on the size of your home and the type of system you’re looking for. Generally speaking, the average cost of a new HVAC system in Arizona is anywhere from $5,000 to $10,000. This includes the cost of equipment, labor, and installation of the system. The cost of the equipment itself can range from around $3,000 to $7,000. The other components, such as labor and installation, can range from $2,000 to $3,000 depending on the complexity of the job and the company you choose to work with.

It’s important to keep in mind that the average cost of a new HVAC system does not include any necessary repairs or maintenance that may be needed to get the system up and running properly. It’s always best to factor in this additional cost when making an informed decision about the best HVAC system for your home.

The Factors That Affect the Cost of a New HVAC System

When it comes to installing a new HVAC system in Arizona, many factors can affect the cost. The size of your home, the type of HVAC system you need, the complexity of the installation, and even the contractor you choose can have a big impact on the price. Here’s a closer look at the key factors that determine how much a new HVAC system will cost in Arizona.

Size: The size of your home plays an important role in determining the cost of a new HVAC system. This is because larger homes require larger, more powerful systems to effectively cool or heat all rooms. If your home is large, you can expect to pay more for an HVAC system than if your home was smaller.

• Type: The type of HVAC system you choose is also a major factor in determining cost. Central air conditioning systems are usually more expensive than window units, while heat pumps are often more expensive than gas furnaces.
• Complexity: The complexity of the installation also has a major impact on the overall cost. If your home requires extensive ductwork to be installed or requires electrical wiring and other technical components, the cost will likely be higher than if the installation were simpler.
• Contractor: Finally, the contractor you choose to install your new HVAC system will also affect the overall cost. Make sure to do your research and find a qualified and experienced contractor who can provide a competitive quote.

Consider these factors to understand the cost of a new HVAC system in Arizona. With this knowledge, you can make an informed decision when choosing the right system for your home.

The Benefits of Getting a New HVAC System

Getting a new HVAC system for your home in Arizona can bring many benefits. A new HVAC system can increase the comfort level of your home and reduce energy bills. Additionally, it can improve air quality and provide better indoor air circulation.

A new HVAC system can also help you avoid costly repairs that could arise with an older system. Newer systems are more efficient than older models, which means they use less energy and cost less to run. This can add up to significant savings over time.

Another benefit of getting a new HVAC system is that it can provide greater peace of mind. With a newer system, you know that it has been properly maintained and inspected, which means fewer surprises down the road. And if something does go wrong, you’ll have the assurance that your warranty will cover any repairs or replacements.

Finally, installing a new HVAC system can help increase the value of your home. The improved efficiency and greater comfort level that a new system provides can make your home more attractive to potential buyers.

Getting a new HVAC system can be a great investment in both the short term and the long term. From improved air quality to lower energy bills, a new HVAC system can bring many benefits.

The cost of getting a new HVAC system in Arizona is an important decision to make. Not only does the price vary depending on factors such as size and type of unit, but you must also consider energy efficiency and installation costs. You should always do your research to find the best option for your home. Remember that even though an upfront investment may be high, the long-term savings from energy efficiency can help offset the cost. With a properly installed HVAC system, you can enjoy better air quality, improved energy efficiency, and lower utility bills over the life of the system. Ready to invest in a new system for your home? Call our Cool Touch team today!

 

The post How Much Does It Cost To Get A New HVAC System In Arizona? appeared first on Cool Touch Air Conditioning & Heating.

This post first appeared on https://www.thetrustedplumber.com

5 Issues That Can Be Fixed With An AC Check-Up

Are you struggling to find comfort in your home but not sure how to fix it? Our Cool Touch team can help. Read below to find FIVE common issues with your A/C system that can be solved with a check-up!

Unpleasant Odors

A musty or sour smell from your AC could be due to dirt, bacteria, or mold. The AC’s dark and moist parts provide an ideal environment for their growth. An AC check-up can help identify and remove the source of the odor. Not only that, but it can also help improve the air quality in your home.

Weak Airflow

If you notice that your AC system is not producing as much airflow as it used to, it could be due to several possibilities. You may have clogged air filters, blocked vents, leaking ducts, low refrigerant levels, accumulation of debris around the outdoor unit, or a fan issue. An AC check-up can help diagnose the issue and make the necessary repairs or replacements to get your air blowing strong again.

Inconsistent Cooling

If certain areas of your home feel abnormally warmer or cooler than other parts of your home, it could be time for an AC check-up. Inconsistent cooling could be a result of malfunctioning parts, a broken thermostat, or an unbalanced air system. Cool Touch A/C professionals can not only help service your system, but they can also offer some advice to better balance your air system. Some advice might include covering large windows to avoid the sun warming your room, checking the insulation of your rooms, or even installing dampers to balance your system and redistribute airflow.

Strange Noises

Do you hear weird, unusual sounds from your AC system? Sounds like grinding, squeaking, or rattling could indicate loose or worn-out parts, a dirty fan, or a malfunctioning compressor. Have professionals check your AC to find the cause of strange noises. You should be able to feel your AC working without listening to it struggle to cool your space.

The post 5 Issues That Can Be Fixed With An AC Check-Up appeared first on Cool Touch Air Conditioning & Heating.

This post first appeared on https://www.thetrustedplumber.com

How To Tell When Your HVAC System Needs Replacing

When it comes to your home’s HVAC system, it’s important to know when it’s time for a replacement. A faulty or aging system can lead to major problems. Problems might include excessive energy costs, air quality issues, and frequent breakdowns. In this blog post, we’ll discuss how to tell when it’s time to replace your HVAC system. We’ll cover the signs to look for, how to assess the condition of your system, and what to expect from a replacement.

Age Of System

When it comes to determining when an HVAC system needs to be replaced, one of the most important factors to consider is its age. Generally speaking, HVAC systems have a lifespan of around 10 to 15 years. If your system is older than that, then it might be time to start thinking about replacing it. Additionally, if your system is more than 10 years old, you should have a professional come and inspect it regularly. This will help ensure that it’s functioning as efficiently as possible. The earlier you can catch any potential problems, the better off you’ll be in the long run.

Frequent Repairs

If you find yourself needing to repair your HVAC system more and more often, it could be time to think about replacing the system. Although it may seem easier and more cost-effective to keep repairing a broken system, frequent repairs can add up quickly. Not only that, but they can be a huge financial burden in the long run. If you are calling for repairs several times a year or you’ve had to replace expensive parts multiple times, then the money you’ve spent on repairs might be better used towards the purchase of a new system.

To make sure that frequent repairs are not an indication of a failing system, make sure to have our Cool Touch team inspect the system before considering replacement. If the system is beyond repair, then it’s time to start thinking about a replacement.

Higher Energy Bills

One of the key indicators that your HVAC system needs replacing is if you find yourself facing much higher energy bills. Old systems are not as efficient as newer models, and this can cause energy costs to go up significantly. If you notice a sudden spike in your energy bills, it might be time to think about replacing your HVAC system. Additionally, if you find that even with regular maintenance and repairs, your energy bills remain high, this is another sign that it’s time for a new system. Be sure to contact a qualified technician to inspect your system and determine if you could benefit from a replacement.

Uneven Temperatures

You may need to replace your HVAC system if you start to experience uneven temperatures in your home. This means that one room may be significantly warmer or cooler than another room. In addition, some areas of your home may be experiencing drafty air, while other areas are overly stuffy. These issues can indicate that your HVAC system is no longer able to effectively heat or cool your entire home. If you start to notice these temperature changes, then it may be a good idea to have a professional come in and assess your system.

The post How To Tell When Your HVAC System Needs Replacing appeared first on Cool Touch Air Conditioning & Heating.

This post first appeared on https://www.thetrustedplumber.com

Everything You Need To Know About Getting An A/C Check

Are you curious about what to expect when getting an A/C Check? Do you want to know when the best time to schedule one is? Look no further! In this blog post, we’ll discuss everything you need to know about getting an A/C Check. We’ll cover what goes into an A/C Check, what benefits you can expect, and when is the best time to schedule one. With this information, you’ll be well-prepared for your next A/C Check appointment. Read on to learn more!

Why Get an A/C Check?

As temperatures rise in the summer months, you may start to worry about whether or not your air conditioner will be up to the task of cooling your home properly. An A/C check can provide peace of mind by ensuring that your air conditioning system is running optimally and can help you catch any potential problems before they become serious issues.

Getting an A/C check is important because it allows a Cool Touch technician to perform a full inspection of your air conditioning system. During this inspection, our technicians will check for signs of wear and tear, as well as ensure that all components are functioning correctly and that the refrigerant levels are adequate. An A/C check can also identify potential problems, such as leaky seals or blocked ducts, that could be causing inefficiencies in your air conditioning system.

An A/C check can also save you money in the long run by helping to avoid costly repairs or replacements due to neglect or improper maintenance. Keeping your air conditioner in good condition will also ensure it runs more efficiently, meaning lower energy bills in the long run.

Finally, getting an A/C check can also improve the air quality inside your home. By making sure all parts of your air conditioning system are clean and free of dust and debris, you can be sure that the air coming through the vents is free of contaminants. This will help keep your family safe and healthy during the hot summer months.

When’s the Best Time to Schedule an A/C Check?

It’s important to schedule regular A/C checks to ensure your system is running efficiently and effectively. But when is the best time to get an A/C check?

The best time to schedule an A/C check is typically in the early spring before the summer heat arrives. This is the perfect time to assess your system and make any necessary repairs or maintenance. During this visit, your technician can do a thorough inspection of your air conditioning system, including cleaning, checking components, testing for refrigerant levels, and more.

If you haven’t had an A/C check recently, it’s best to schedule one as soon as possible. This way, you can have any issues fixed before the hot weather arrives and your system has to work harder. Scheduling regular A/C checks every few years is also a great way to make sure your system is in good working order.

Regular maintenance is essential to keep your air conditioner running efficiently, so scheduling an A/C check should be a priority. Doing so will ensure that you stay comfortable during the warm summer months and avoid costly repair bills in the future.

How Should I Prepare For My Appointment?

Preparing for your air conditioner check is essential to ensure you receive the most benefit from the appointment. There are a few things you can do in advance of your appointment that will ensure a thorough and successful check.

First, it’s important to be aware of any potential issues or concerns you have regarding your air conditioner. Letting your technician know in advance of any problems or observations you have can help them narrow down their search and provide you with a more efficient and accurate diagnosis.

It’s also important to clean up the area around the unit prior to your appointment. Make sure that you remove all debris and dust so that the technician can easily access the unit for their inspection. Additionally, if there are any plants or shrubs growing near the unit, make sure they are trimmed back to give the technician easy access.

Having your air conditioner checked is essential for ensuring that your system is running as efficiently as possible and that any problems are caught before they become major issues. Scheduling an A/C check should be done annually and it’s best to do it during the springtime when temperatures are still mild and it’s not too hot. With a thorough A/C check from our Cool Touch team, you can rest assured that you’ll be able to enjoy a cool, comfortable summer season.

The post Everything You Need To Know About Getting An A/C Check appeared first on Cool Touch Air Conditioning & Heating.

This post first appeared on https://www.thetrustedplumber.com

If you’re not a professional plumber, you likely won’t know that your sewer lines are breaking right underneath you. Sacramento homeowners need to be aware of the warning signs associated with sewer pipe breaks so they can take action before damage done to their property worsens.

Read More

There are many times when you might need a new gas line in your home. Maybe you had an electric appliance such as an oven, water heater, or clothes dryer, and you are purchasing a new one that runs on natural gas. Or maybe you’re tired of swapping out grill tanks all the time, and you want to run a gas line directly to the back yard so you can hook up your grill and have barbecues any time you like. 

Can you do the work of running a new gas line yourself? The simple answer is no, and there are some extremely important reasons why.

Experience

You probably think of a plumber when you have a problem with your water pipes. Well, the work they do easily translates to working on gas pipes. They tend to be made of the same materials, encounter a lot of the same potential issues, and with both gas and water pipes, it’s critical that they be sealed absolutely tight with no leaks. And our team of plumbers has a lot of experience with gas pipes. Instead of figuring it out as they go, which a general maintenance worker or DIY enthusiast would have to do, they know exactly what steps to take and precisely how to do them.

Tools

Again, many of the same types of tools are necessary when working on piping, whether that piping is destined to carry gas or water. A qualified, professional plumber has professional-quality tools specifically designed to do these exact tasks. Trying to find and purchase the correct tools yourself would be challenging and very expensive. 

Safety

Working on gas lines is incredibly dangerous for an untrained person. There are immediate risks, such as causing damage to your home or injury to yourself, or even an explosion. And then there’s the risk that something will go wrong during your DIY gas pipe installation and you won’t realize it. This could lead to a slowly-growing hazard, like a tiny gas leak, that might one day have disastrous results. For the sake of your home, and the safety and well-being of yourself and your family, we implore you not to take these extreme risks.

Legality

The most black-and-white reason is that in most places, there are legal statutes in place that simply don’t allow amateurs to do any work on gas lines. You do not want to run afoul of the law. And of course, those laws are in place to avoid exactly the sorts of safety hazards we just explained. It’s critical to have not just a plumber but one with the correct certification, licensing, and insurance to do your gas line work. When you need gas piping installation in Orlando, you can count on us to do the job right. Our team has been providing these services to homes in our area since 1975.

Contact Modern Plumbing Industries, Inc. today and reach professionals with the training and experience your home deserves.

The post Why You Can’t Run a Gas Line on Your Own first appeared on Modern Plumbing Industries Inc. Blog.

This post first appeared on https://www.modernpi.com