You want your heater to operate as effectively and efficiently as possible. There is more than one way to do this. One thing that many homeowners overlook doing though is changing their HVAC system filter.
Your filter is an often underestimated but highly important part of your system. It protects your heater and keeps it running for a lot longer than it would without this level of protection.
Our question for you is whether or not you have changed your filter recently? If not, you probably should! Let’s look at why regular filter changes can be so important for your home comfort.
How Does My Filter Help?
An air filter for your HVAC filter can often be seen as a part of your system meant to help clean up your airflow. While this isn’t false, it may not mean what you think it means. Your HVAC filter isn’t made to help the air you experience, but rather the air that enters your HVAC system itself.
This filter captures dust and debris in order to keep it out of your home comfort systems. This keeps internal components far cleaner which will help to improve its operation and efficiency. It won’t stop every single dust mote from entering your system, but it will block a majority of the debris!
When Should You Change Your Filter
Changing your air filter is going to be something that you should do regularly. At the most, check and change your air filter each month. This usually is best for homes that use their HVAC systems heavily and may have somewhat poor air quality. At the least though, make sure to change your air filter every three months. This ensures your filter won’t get too dirty and start causing problems.
What Does a Dirty Air Filter Do?
So what exactly can happen if your air filter is left to worsen? Well, the short answer is that it will start to create problems with your heater. These problems can include:
Weakened airflow: A dirty air filter will make it hard for air to enter your heater. That will make things much worse for your system in the long run.
Poor heating: Less air entering your system means your heater will have a harder time creating heat.
Dust build-up: Your heater will eventually fall prey to increased dust build-up in its heating components. This can create a variety of issues such as bad smells, delayed ignition, and poor heating.
Higher bills: You are also going to be increasing your energy bills in the long run if you leave your dirty filter in for too long. This will only get worse the more time that passes.
As we’ve said, filter changes are highly important to the well-being and effectiveness of your heater. Changing them is one of the easiest and more cost-effective ways to help protect your heater in the long run.
When you really get into the intricacies of your home’s plumbing, you’ll soon realize that there is much to consider. One of the details of your plumbing that you should pay attention to are your fixtures.
When most people think of fixtures, they think of them from an aesthetic standpoint. While it is important to make your bathroom, kitchen, or any other part of your home look the way you want it to, it’s equally important to consider the flow. You might have heard about low flow fixtures because they’re known to help the environment and save you money. Have you ever wondered how, though? We’re prepared to get into all the details because we specialize in plumbing in Orlando, FL.
What Are Low Flow Fixtures and Faucets?
Let’s start off by talking about exactly what low flow fixtures and faucets are. These systems are water-saving plumbing fixtures designed to conserve water by having a lower flow rate of water per flush. Low flow fixtures include toilets, showerheads, and faucets.
The Benefits of These Systems
Now let’s get into what probably brought you to our blog today–the benefits of low flow fixtures and faucets. There are quite a few benefits. It’s why we recommend these faucets and fixtures to so many people. Here are the benefits of these systems:
Decreased Waste
According to the Environmental Protection Agency, older fixtures (like toilets) can use about 6 gallons of water per flush. This might not sound like much until you learn that low flow toilets use less than 1.5 gallons of water per flush.
This means that you’re going to save yourself a considerable amount of water. This helps you and your bottom line and it also helps the environment.
Don’t Fret!: We receive a bit of pushback from some homeowners because they’ve had negative experiences with low flow toilets in the past. We can assure you that low flush toilets of the past didn’t have the technology current models have. The new models on the market have the capability to create clog-free flushes.
Energy Savings
You’re conserving energy when you’re conserving water. Let’s say you’re the type of person who likes to start off every morning with a hot shower. This means that energy is needed to heat the water, your water heater needs to perform to do this, and the water needs to travel through your plumbing system to your showerhead. This is all energy expended to start your shower. Using less water reduces the energy your system expends to work in your home.
Cost Savings
Who doesn’t want to save a little money? Owning a home can really get quite expensive. We’d all like a little relief on our wallet where we can find it. This is possible once you reduce the energy consumption in your home. When low flow fixtures start to save you water and energy, they’ll also save you money.
Contact Modern Plumbing Industries, Inc. today to schedule an appointment with our professionals. We care about the integrity of your home’s plumbing system.
You’ve probably heard the term “hydro jetting” before, especially on this blog. We’re huge proponents of this service and we recommend it to every customer who asks. It’s absolutely perfect for clogged or dirty drains, and for customers who are nervous about previous poor experiences with amateur plumbers.
That being said, some homeowners need a bit more convincing. How the heck can natural water be enough to remove even the oldest and most hardened drain clogs? Well, as your local expert plumber in Wayne, NJ, we’ve got this topic covered!
There’s huge scientific backing behind hydro jetting as a concept, and it functions naturally in a lot of ways already. Our equipment is just designed to use a natural process in a way that’s going to clear specific areas of your drain. Keep reading to learn about how hydro jetting is proven to remove the toughest drain clogs and keep your plumbing system intact.
What Is Hydro Jetting?
Hydro jetting is a nifty process where a plumber uses an auger system to shower a drain with high-pressure water pumps. If you’ve ever been to the beach on a day with a rough current, you’ll understand how powerful water can be when it’s got the weight and pressure to move materials. This auger can fit through even the narrowest of drains, so you get a powerful drain cleaning solution that fits almost any kitchen or bathroom situation.
Hydro jetting doesn’t use any chemicals and it doesn’t take forever, like some other natural drain cleaning processes. It’s fast, effective, and deals with even the toughest drain clogs in an instant.
Alternatives to Hydro Jetting
Hydro jetting provides a great reason to call for an expert plumber, because only professionals have this kind of equipment on hand. It’s never worth it to try and purchase your own hydro jetting system, because they’re just too expensive for the kind of solutions they provide.
However, if you don’t think your drain clog is quite to the point of needing hydro jetting, we recommend using a specialized plunger or a drain snake to clear out the debris. Don’t forget, our team of pros has other types of equipment aside from hydro jets, like industrial-grade drain snakes and plungers, that can also do the trick if yours can’t!
Stay Away From Chemicals
Some homeowners might lump “drain cleaning chemicals” in the DIY drain cleaning category, but we’d urge you to reconsider this. Drain cleaning chemicals are caustic, especially the formulas you find in your grocery store. They will not only eat away at drain clogging materials, but they’ll also dissolve the lining of your pipes to the point where you’ll spring leaks more often and deal with other issues. Not to mention the fact that drain cleaning chemicals are hazardous to your body, and they can poison the wildlife on your property when they do leak out of your drains.
When in doubt, call for a professional plumber. We have the skills, expertise, and technology to handle any drain clog that you might have.
It’s not uncommon for DIY homeowners to treat toilet drains and flat drains (sinks and tubs) as one and the same. They’ll often use one snake and one plunger to solve for clogs in both. However, these types of drains are different, and for best results, you should use a different type of snake and plunger. Because, despite having the same function, they each work a little differently.
There’s nothing worse than the frustration or dread you experience when watching your toilet or sink backing up. Clogs happen from time to time, but they’re annoying to deal with, and calling a plumber every time can add up.
Pouring harmful chemicals down your drain isn’t good for the pipes or the environment either.
As it turns out, there are a few DIY options you can try first that are safe and easy. These range from homebrewed safe de-cloggers to fishing for the clog yourself. You can give these a try, and if all else fails, plumbing in Toronto is easy to find.
Read on to learn why you shouldn’t use harmful chemicals and four alternative ways to unclog your drain.
Why You Shouldn’t Use Harsh Chemicals
Dealing with a clogged sink is more trouble than it seems. There are times when it seems like something simple. Depending on the issues you’re facing, you might need professional help from a plumbing service.
That said, when trying to deal with it alone, choosing a DIY method is most people’s go-to. Often, this involves a trip to the store for a plunger and the standard unclogging chemicals. The thing is, it’s easy to buy products that do more harm than good.
While industrial-strength de-clogging chemicals look like they work, they aren’t always the best. More often than not, they do serious damage. Some of the common problems these causes are eating the sealant away, dissolving pipes, and even eroding the sink.
Not to mention how harmful they can be to your health. If you look at things closely, you’ll see a warning after warning on the bottle. This comes as no surprise, since if it can go through food debris, metal, plastic, and rubber, what more is your skin?
You’ll find that your hands will feel dry or even itchy after using such chemicals and cleaners. Their fumes can also result in breathing problems and irritated eyes. Making sure you have the right protective gear before using them is important.
Finally, they’re bad for the environment. Such chemicals aren’t as sustainable as they should be as they come in one-use plastic bottles. These products usually end up in sewer systems and water sources and can even leach into groundwater.
1. Use Safe Home-Brew De-cloggers
This should be most people’s initial go-to approach before they run to the store to buy anything. Start by looking at your sink and drain and determining what materials you’re working with. A pot of boiling water poured slowly down the drain can be pretty effective.
You want to check your sink and pipes because boiling water can sometimes cause damage. If your porcelain sink is ancient or your PVC pipes are super old, you should dial back the heat a bit to be safe. If the heat isn’t enough to dissolve the clog, move on to another old favourite.
Baking soda and vinegar are some of those magic potions that can clean almost anything. Start by pouring 1/3 of a cup of baking soda down the drain, and follow it up with an equal amount of white vinegar. The reaction will be pretty foamy and scary, but it’s effective.
The longer you leave it to work, the better the chance of dissolving the clog. An hour is a bare minimum, but leaving it overnight will yield the best results. When you’re ready to give the drain a try, pour some boiling or hot water into it to get rid of the foam and test the flow.
If all else fails, you might want to start looking at plumbing in Toronto.
2. Get Physical
This is one of the least favourite approaches to unclog a drain. It’s also one of the reasons why many opt for finding the best plumber they can instead. If the baking soda and vinegar didn’t do the trick, time to roll up your sleeves and put on some gloves.
You can start with a plunger to see if you can get anything going that way. Chances are you’ve already tried that, though, before you reached for the water or baking soda. The next step is to unscrew the drain cover, remove any major obstacles, and go fishing.
A lot of the time, the clog isn’t that deep. Hair, dried toothpaste, or other debris can somethings get pulled out by hand. It’s gross and uncomfortable but could save you a drain services call.
Make sure to disconnect the garbage disposal first if it’s messing with the kitchen drain. The last thing you want is to add yourself to the clog.
3. Try a Snake
This is one that many plumbing services will have in their arsenal. A plumbing or drain snake is a flexible wire used to fish through and unclog drains. Alternatively, they’re known as drain augers.
These can range from a normal wire you feed into the drain yourself to electric or motorized ones. The standard wire is safer for beginners looking for a DIY solution at home. You can feed the snake down the drain or unscrew the sediment trap under the drain or sink and feed it in that way.
When you hit the clog, you’ll feel it. From there, it’s only a question for elbow grease while you break it up.
4. A Wet Vacuum
A wet and dry vacuum is situational since not everyone has one or can use it where it’s needed. Those lucky enough to have one can use it to suck up the clog from the drain without getting their hands dirty. You’ll need to switch your vacuum to water mode and create as tight a seal around the drain as you can with your hose.
Depending on the power of your vacuum and the position of the clog, you should have little trouble.
When to Call Plumbing in Toronto
Having a clog doesn’t mean you have to run to the plumber right away or spend tons of money on harmful chemicals. There are DIY solutions that are effective, safe, and better for the environment and your wallet. When you’ve run out of options or are in over your head, calling plumbing in Toronto is your best bet.
At Anta Plumbing and Drain Services, we’re proud to serve the Toronto area. We have the knowledge and experience to tackle any of your plumbing issues. If you have any questions or want to learn more, give us a call today.
Do-it-yourself projects continue to grow in popularity as people tackle home projects on their own to save money, beat stress, and gain a sense of self-accomplishment. In fact, DIY trend statistics show that nearly 50% of U.S. homeowners took on DIY home improvement projects in 2019, and a 4.2% rise in DIY home projects is expected in 2022. One problem area some homeowners try to solve on their own is plumbing.
All of the plumbing fixtures, drains, and pipes in your home are connected to the biggest (and most important) piece of plumbing in your entire home is the main sewer line.
Between improper use of these fixtures, drains, and pipes and many other outside factors, the main sewer line can take a beating over time. Eventually, the main sewer line can become clogged (or even collapse) to the point of needing serious repair or even replacement. This wear-and-tear can turn into a headache that you don’t need!
Knowing what causes sewer lines to clog and the warning signs to look out for can help prevent you from ever having to deal with a major repair or replacement.
What Are the Common Causes of a Clogged Sewer Line?
Almost every homeowner has run into the unfortunate situation of having a clogged drain or a slow-running sink or bathtub. While a single clog can be a pain, it’s typically easy to fix.
However, what happens if all the drains in your home begin backing up at once?
It could be a sewer drain clog. The repair or replacement of an entire sewer line (or even just a section) is sometimes required when drain clearing efforts don’t work. Here are the primary indicators that a repair or replacement procedure is required:
1. Severe Pipe Damage
When sewer pipes are broken or ruptured, the sewage won’t be able to properly drain through the system—leading to immediate and frequent backups. Common causes of sewer pipe damage include:
Sewer pipe rupture due to shifting soil, settling, increased traffic on the ground above, or use of heavy construction equipment above ground.
Corrosion of an older pipe, causing the pipe to break or collapse.
Leaking joints where the seals between sections of pipe have broken, allowing water and sewage to escape.
2. A Sagging Sewer Line
While this is out of a homeowner’s control, sagging sewer lines happen over time. This “bellied” pipe occurs when a section of the pipe has sunk due to ground or soil conditions.
The low spot in the line will begin to collect paper and waste—resulting in repeat blockages.
3. Tree Root Infiltration
Older sewer lines were sometimes constructed out of clay or other porous materials. In addition, the connections between the pipe sections weren’t as tight as today’s PVC pipes.
As tree and shrub roots grow, they search for sources of water. If they latch onto a sewer pipe, they will grow into the pipe in order to reach the water inside. As the roots expand over time, it can cause the line to break.
Treating your toilet as a trashcan will cause sewer drain issues. The number one rule to remember when flushing the toilet—make sure only human waste and toilet paper goes down.
5. Pouring Grease Down the Drain
Grease, fats, and oil are all some of the biggest culprits when it comes to clogging lines. It’s NEVER a good idea to pour grease, oil, or other fats down a drain.
Always pour hot grease into a coffee can or jar. Once it solidifies, you can throw it away. People mistakenly think that running hot water when pouring grease down a drain helps wash it away. This is not the case.
If you’re concerned about catching your sewer line issue before it’s too late, we’ve gathered four warning signs you should look out for:
Drains or Sewer Line Keeps Clogging
Our advice to you is to steer clear of liquid “drain cleaner” and call a professional to check out that backed-up drain! If you have a drain that continuously clogs, especially in the lowest level of your home, it could come from a break or blockage in your sewer pipe.
Multiple Fixtures Are Clogged
You aren’t sure if the toilet or shower drain keeps clogging because of an individual pipe blockage or because of a sewer line issue. However, a very obvious sign of a sewer line issue is when more than one plumbing fixture backs up at the same time.
Strange Reactions When Using Plumbing Fixtures
The next thing to look for when you suspect a sewer drain clog is any unexpected or unusual reactions when using plumbing fixtures. You may have a problem if:
Flushing the toilet causes water to back up from your tub or shower.
Toilet water starts to bubble. Should this happen, run water in the sink closest to the toilet for a minute or so. If the water continues to bubble (or rises), then it’s not a fluke.
Hearing a gurgling noise as the toilet flushes or the water in your bathtub or shower is draining. If you hear this, contact your local plumber.
Your Lawn Starts to Change
A sewer line typically extends from your home, through your front lawn, and into the city’s sewage system. Head outside and see if you can notice any of these changes to your lawn:
If you have a break in your sewer line, you’ll see an indentation on your lawn.
If you find a soggy patch of grass when it hasn’t rained or snowed recently, it may be sewage from a broken sewer pipe.
Sewer Line Repair & Replacement Options
While some drain cleaning and maintenance tasks can be safely performed by a homeowner, sewer line repair and replacement tasks should always be performed by a certified, professional plumber.
Video Inspection
By employing an in-line video inspection camera, you will be able to see where the problem lies and experience faster and less costly repairs. Here’s how it works:
Images captured by the camera are transmitted to a device operated by the camera technician. These images are recorded for further review.
At the same time, a radio transmitter on the camera records the physical location of the line and its depth from the surface, so the appropriate repairs can be properly planned and implemented.
Once it’s determined—and you agree—that a sewer line must be repaired or replaced, there are a few options to choose from.
Traditional Sewer Line Repair or Replacement
The traditional sewer line repair or replacement is typically performed using a backhoe to dig up the area surrounding the line, allowing easy access to the problem area. Once the repair is made, the backhoe is used to refill the area.
This option may be the only option at times, depending on the condition of your pipes, their configuration, or where you live.
Trenchless Sewer Line Repair Methods
Trenchless repairs involve making small access holes where the damaged pipe starts and ends. A new pipe is then pulled through the existing pipe, which bursts the old pipe into pieces while simultaneously laying new pipe.
Trenchless repairs cause less damage to yards and driveways than traditional repair methods because only the dirt at the beginning and end of the line is disturbed.
Contact a Professional Plumber for Your Sewer Line Repair Needs
No matter what option you eventually choose, the work needs to be completed by an experienced and licensed professional plumber. At Len The Plumber, we’ve been serving the Mid-Atlantic region with unrivaled plumbing services for more than 20 years, and we consider our plumbers the best in the business. If you’re having a sewer or drain issue, we guarantee we can diagnose and fix it—often the same day!
For sewer line repair and replacement in MD, DC, VA, DE, or PA, trust the experts at Len The Plumber. Contact us online or call (800) 950-4619(800) 950-4619 today!
A leaky faucet often indicates a problem with one of the parts being worn out. How you go about repairing the faucet depends on where it drips and the mechanical makeup of your faucet. You have four main types of faucets that will depend on compression, disc, cartridge, and mechanism.
Before you attempt to fix a leaky faucet, you should first determine the type of faucet to understand how you go about fixing it. Here are some of the tools you will need before starting:
If you have a widespread faucet there are usually decorative covers over the valves. Most times there is a fine thread on the valve assembly so attempt to unscrew the trim piece. ÿBeneath each knob, you will find a screw that mounts the handle to the stem. You will unscrew the handle and gently remove the handle. Sometimes the faucet handle will not come off the stem easily. Spray the WD-40 on this part to loosen it.
After you have loosened the packing nut, you should see the stem. You want to take this part off all. At this point, different faucets will diverge in how you deal with them. For example, you have some stems that pop off while others will twist from the valve. Remove everything gently. You want to skip over the possibility of damaging the parts because this could exasperate a leaky faucet problem.
If your faucet is under 25 years old it has a cartridge. After turning it on and off for 25 years the seats are probably worn out. Attempt to pull the cartridge straight out using a set of channel locks pliers. Sometimes these cartridges are tough to remove because scale has built up and locked them in place. Give the cartridge a slight wiggle while pulling and it should eventually work itself out. If you can?t remove call a plumbing professional. There are cartridge removal tools available.
Replacement washers and O-rings.
Replacement washers and O-rings. Adjustable wrench. Philips screwdriver. WD-40.
O-ring.
Stem.
O-ring. Stem. Packing nut. Screw. Handle.
At this point, everything should remain together. Look at the washer and the O-ring inside of the valve seat. Many times, this part causes leaks when damaged, or the seal starts to wear off. You will remove the washer and replace it with the new washer.
You will also want to replace the O-ring because many times this component experiences damage. Before replacing your O-rings and washers, first, check to see if it fits right. When unsure of either, look at the seat to check if the sides will fit with the flat washer. You may have to buy a more appropriate size.
For those with problems finding the right sized O-ring, instead, take it to the hardware store to get an exact fit. For those unsure about this, check the seat and see if the sides will fit the cone shape. Then you can buy the appropriate O-ring. Instead of taking an old O-ring to the hardware store, you can also opt out of that to buy a variety of different sized O-rings in a package. It does cost a couple of extra bucks, but it will be worth every penny to get the size needed.
Once you have the parts, you will need to reassemble them. It will be done in this order when putting it back together:
Tips and Troubleshooting
After you have taken apart and reassembled your faucet, you will want to check to see the faucet no longer drips. If it does, the cause could be deeper than a busted O-ring. In many cases, the next possibility lies in corrosion with the valve seat.
This happens when it remains dirty over time and eventually produces a leak closer to the spout of the faucet. If that fails to fix your leaky faucet, other potential problems include loose parts, worn-out seals or broken plumbing. If you have tried these things without success, it might be time to hire the big guns and call a plumber.
Putting It All Together
When this happens, you will have to identify where the water enters the home to shut it off. Keep in mind, when you shut off the water valve, an entire residence will cry out for the lack of water. Nevertheless, it sometimes becomes necessary during a repair.
We’re reaching the final days of January, but this doesn’t mean that it’s too late to get the ball rolling on some of your New Year’s resolutions. It’s not always about how you start. How you finish is just as important. If one of your goals is to keep your home clean and functioning, then make sure that you’re taking care of plumbing in Orlando, FL.
One of the best ways to do this is with drain cleaning. Today, we want to take the time to answer common questions and give you the best advice surrounding this service. We’re professionals you can trust because of our reputation. We’re known for our exemplary service.
What You Need to Know About Drain Cleaning
So let’s start from the beginning–what exactly is drain cleaning?
Professional drain cleaning is when plumbing technicians use specialized tools to remove buildup from your drains. Here on our team, we like to hydro jet. Hydro jetting uses a high-powered stream of water into your drain to get the buildup off of the sidewalls. This is going to get rid of things that cause build-up like coffee grounds, fat, oils, and grease. It’s going to get rid of current clogs, help prevent future ones, and keep your pipes in great shape throughout the entire process.
Why Drain Cleaning Helps Long-Term
Now you may wonder how drain cleaning helps long-term. We mentioned it above, but we’ll get into the details here.
Of course, drain cleanings are something you should call for if you’re experiencing a clog. Drain cleanings are also something you should invest in on a routine basis even when there isn’t a glaring issue with your plumbing.
Routine cleanings are great because they get rid of all the little things that add up to poor plumbing. Mild things like soap scum buildup or hair in your shower drain can cause poor drainage that many people just deal with. Routine cleanings ensure that you’re never “dealing with” anything.
Routine cleanings help prevent future clogs and extend the lifespan of your plumbing system as well. It does this by clearing away the subtle problems we mentioned above. This clears build-up and gives you a better chance to avoid preventable clogs in the future. Our pros will make this easy for you with their high-quality service.
Why Drain Cleaning Is Always Better Than Chemical Drain Cleaners
One thing we want to leave you with is the importance of avoiding chemical drain cleaners. Chemical drain cleaners are no good. We understand how it might seem like a good idea to go to your local store, grab a chemical drain cleaner off the shelf, and then pour it down the drain. The problem with chemical drain cleaners is that they really don’t clean well. Chemical drain cleaners are actually caustic. They’ll eat away at your clog but these also corrode your pipe itself. This is why you should invest in professional service.
Professional service is sure to get rid of your clog and leave your pipe in perfect condition.
Sure, we know that in the immediate aftermath, having a family friend check on your furnace system when something is wrong could seem like the cheapest solution. While we’d beg to differ when you look at the long term, we understand that in the short-term those kinds of repairs will always be cheaper. However, they will never be safer.
We understand that you might have a buddy who is a volunteer firefighter, or even a scientist at the nearby University, but that doesn’t mean they’re especially well-equipped to provide a furnace safety inspection the right way. These are complex systems, and when something is going wrong you need professional furnace repair in Caldwell, NJ to ensure that there are no safety issues cropping up.
Let’s focus on three reasons why professional furnace repairs will always be the safer option when compared to DIY or amateur fixes.
Burners Need to Be Treated With Care
Firstly, in order for a furnace repair to go smoothly, the burners need to be treated with care. This is not something that everyone who knows a thing or two about furnaces will inherently identify. Burners are responsible for actually burning the fuel that comes into the combustion chamber and turning it into heat. With improperly handled burners, they could get dirty or broken, and you could start seeing a build-up of gas inside the system.
When a professional handles your furnace repair, you can rest assured that they’ll keep the burners in good shape and might actually clean them to ensure they work safely and properly. These are some of the most sensitive components of a furnace and they should never be handled by amateurs.
The Heat Exchanger Must Be Kept Safe
The heat exchanger is a delicate component. It’s responsible for separating the combustion gases that come from burning fuel, from the clean air of your home that needs to be kept safe. When a crack develops in the heat exchanger, you could see an influx of natural gas, smoke, or carbon monoxide entering your home’s breathable air which is absolutely a safety concern.
Professionals are trained to spot issues with heat exchangers. Not only that, professionals will never accidentally bump or break the heat exchanger for whatever reason, which is something that an amateur could do.
Vents and Exhaust Must Be Kept Clear
Where do those exhaust fumes go after they’re created through the burning process? They need to be vented out of your home of course! Sometimes your ventilation and exhaust systems could have problems, and an amateur might not have the tools to address them correctly. This could mean that they end up accidentally breaking or clogging up your exhaust vent which is a huge safety problem, as the exhaust will have nowhere to go but back into your home.
Professionals know these systems to the point where they will never jeopardize your home’s health and safety with unreliable service. Pros from our team treat vents and exhaust ports with complete care.
When you really get into the intricacies of your home’s plumbing, you’ll soon realize that there is much to consider. One of the details of your plumbing that you should pay attention to are your fixtures.
We’re reaching the final days of January, but this doesn’t mean that it’s too late to get the ball rolling on some of your New Year’s resolutions. It’s not always about how you start. How you finish is just as important. If one of your goals is to keep your home clean and functioning, then make sure that you’re taking care of 